Cotton Spinning
Dnnft Rubber Roller
|
Kinds
|
Type
|
Hard
|
Color
|
Structure
|
Varieties of Spinning
|
Main Characters
|
| sigle-layer |
double-layer
|
aluminium bushing
|
|
Draning Rubber roller
|
Tc922
|
88±3
|
white
|
√
|
√
|
|
Pure cotton and blend fabrid
|
Suitable for FA311,FA312,FA304,,FA315
draning
machines with the drawing
|
|
Tc875m
|
84±3
|
dark iron red
|
√
|
√
|
|
Pure cotton and blend fabrid
|
Suitable for A272F,FA303,Drawing
machines with theDrawing speed blow 250mPer minut Double-deck
sleeve difference is 1mm.noAdhension needed,long cyde,Small
deformation,convenient use
|
|
Coanse Yarn
Rubber Roller
|
Tc9080
|
80±3
|
Grey white
|
√
|
√
|
|
Various count of pure cotton
and T\L blen
material
|
Double-deck sleeve difference
is 1mm,small deformation,with the deuease of the hardness,the
index of CV% of the coarse yarn and cotton cap of both cosrse
and netined yarn can be imprue
|
|
Tc9575
|
75±3
|
grey blue
|
√
|
√
|
|
|
Tc931
|
70±3
|
purplish red
|
√
|
√
|
|
|
Retined yarn rubber roller
|
Commond rubber roller
|
Tc9518
|
82±3
|
light brown
|
√
|
√
|
|
Cotton and polyester
fiber trueran blending
material
|
Double-deek sleeve diffence
1mm small deformation,near-resistance,
ail-resistance,heat-resistnme,pressure-resistance.
|
|
Tc9080
|
80±3
|
grey white
|
√
|
√
|
√
|
|
Tc9075
|
75±3
|
light blue
|
|
√
|
√
|
mediccm ar fine count
of pure cotton
|
Near-resistance,small deformetion,good
elasticity,antistatu,good
andsteady yarn
guilty
|
|
Tc9070
|
70±3
|
iron red
|
|
√
|
√
|
|
Tc9065
|
65±3
|
green
|
|
√
|
√
|
|
Tc9580
|
80±3
|
black
|
√
|
√
|
|
polyester fiber trueran blending
and
mediumfine chemical fibers
|
Good elasticity,antistatic,no
adhesion,
Stendy quality,ozone resistance,
anti-aging wear-resistance
|
|
Tc9575
|
|
green
|
√
|
√
|
|
|
Tc9568
|
|
white
|
√
|
√
|
|
|
Surface non-treated rubber
roller
|
Tc951A
|
65±3
|
orange
|
|
√
|
√
|
medium-fine
count pure cotton
|
1.Double-deck sleeve difference
is 1mm,
aluminium bushing sleeve
difference is
0.08-0.12mm.
2.After grinding,the surface
of the sleeve should be with the tolerance of 0.6-0.8mm.
3.After grinding,it could
be put in the machine without any treatment,
anti-disorderly winding CV%
is obviously lower than the treated roller,
longer life,up to the world
level.
|
|
Tc951B
|
70±3
|
white
|
|
√
|
√
|
|
High adsorption
Coating rubber roller
|
Tc9775
|
75±3
|
lake
green
|
|
√
|
√
|
Pure cotton and polyester
fiber trueran blending material and medium filinent
|
Good elrsticity,low speed
of the hardness
increase,large amount of
the coating adsorption no glowing surface,larger pouwer
of holding fibers,steady and good
yarn quality.
|
|
Tc9770
|
70±3
|
lake
blue
|
|
√
|
√
|
|
Tc9765
|
65±3
|
orange
|
|
√
|
√
|
High
Speed Chemical Fiber
Spinning Strape Rubber Roller
| Type |
Color
|
Specification |
Main
Characters
|
Application
guide
|
| H80 |
outer:black
inner:grey |
R49X38X7.5 |
suitable
for sorang SDS-600、700、800.etc.addelastic
machine made in U.K with moderatesurface hardness,wear-resistance,heat-resistance,small
deformation,used for polyester fiber and elastie silk
spinning. |
in
order to make the rubber cot closely tightened with
roller iron core monld should be taken as an accessary
tool,The pressure put on the rubber cot must be uniformly
exerted without slanting.if possible,should be used
to make a better performance |
| R52X35X9 |
suitable
for FTF8E/3 made in France with moderatesurface hardness,wear-resistance,heat-resistance,small
deformation,used for polyester fiber and elastie silk
spinning. |
| H73 |
outer:grey
inner:black |
R43X36X11 |
suitable
for BarmagFK6--900 made in Germany with moderatesurface
hardness,wear-resistance,heat-resistance,small deformation,used
for polyester fiber and elastie silk spinning. |
Aluminium
Busing Apron Casing And Machine Withdrawing
Application
Struction & Maintenance
In
The manual aluminium busining apron casing and macchine manufactured
by our factory has some special features of excellent appearance,delicate
design high efficieney of casing and reliability of the performance
. The application instruction and the method of as follows:
A.Processing of the bearing's iron shell.
The new iron shell should be cleaned by gasoline
of 120# before being used to remove the oil stain and other waster
and make the gas volatilize fully.
Vsing callipers (data showing better)to check
the outer diameter difference with the minincum of 19=-0.01mm otherwise,
it will result in casing difficulty and unefficient holding ability.
B.Operation
1 Checking the equipment be sure of good running , adjusting the orientating
bolt at the top according to the length of the casing apron.
2 Putting one end of the bearing at the operating table of the casing
machine, making steady.
3 Using your left hand to put the aluminium apron into the arientating
column.
4 Using your right hand to hold the handle and press the apron into
the iron shell gradually,and to the bottom at the prosition.
5 When withdrawing the apron,putting one end of the bearing into the
withdrawing machine,using your right hand to press the handle removing
the apron. C.Equipment maintenance
Cooper coat should be protected with oil
regularly to ensure,the lubrication and therack should be couered
with some grease lubrication.
|
